SIGMA HF-360 XP HIGH POWER 1kW FIBRE GLASS VERTICAL ANTENNA 80 TO 10 METRES

SIGMA HF-360 XP HIGH POWER 1kW FIBRE GLASS VERTICAL ANTENNA  80 TO 10 METRES
Hover over the image to zoom

SIGMA HF-360 XP HIGH POWER 1kW FIBRE GLASS VERTICAL ANTENNA 80 TO 10 METRES

Sigma Euro-Comm SE-HF 360 XP Fibre Glass High Power 1kW Vertical antenna


The Sigma Euro-Comm Ltd HF360 is an end fed vertical antenna, capable of allowing the user to work 80 meters through to 10 meters using an ATU. The antenna can be pole mounted at ground level or elevated depending on the user’s personal requirements. The antenna is rated at 1KW* pep. The antenna comes with fixings and installation guide.


How it works: The antenna is fed using 50 Ohm coax via a SO-239 socket at the base of the unit a 4:1 UNUN transformer is located in an IP65 weather sealed box at the bottom of the bracket section of the fibre glass elements. The antenna comes in four parts, three fibreglass poles and one stainless steel tapered whip. The transformer reduces the impedance at the feed point to a more acceptable level making the antenna much more efficient and allowing proper and easy tuning via an external ATU and automatic ATU’s found in most modern radios.


The antenna can be grounded if the user experiences excessive local static noise, but as the UNUN is DC grounded: grounding will not affect the tuning ratios.


Band / With ATU


3.5 MHz 80m / 1.1

5 MHz 60m / 1.1

7 MHz 40m / 1.1

10 MHz 30m / 1.2

14 MHz 20m / 1.1

18 MHz 17m / 1.1

21 MHz 15m / 1.1

24 MHz 12m / 1.1

28 MHz 10m / 1.1

29 MHz 10m / 1.1


Specifications


Type End fed vertical

Frequency TX / 3.5 - 30 MHz

RX / 1.8 - 55 MHz

Power handling 1 kW PEP or CW & 200 watts max for data modes

Impedance 50 Ohms

Connector SO-239

Length 5.5 meters 18 feet


Please use a good quality 50 Ohm coax, rg-213 or Mini 8 are probably the best choice.


*1kW power rating is for intermittent amateur radio use (CW or PEP) for data modes (FT-x, RTTY, etc) or constant carrier data modes a lower maximum of 200 Watts is recommended.


*If you are using a high-power amplifier it is essential that an external ATU is used between the antenna and the amplifier, otherwise damage may occur.


Measurements were made using a Yaesu FTdx1200 and internal ATU and a Yaesu FT450D and external LDG-1200 ATU.

    SKU7426799303345
    £0.00
    £179.95
    Reward points:0